-
-
dmance replied to the thread CHORD ELECTRONICS DAVE.You misread my reply. All your other points are good solutions ...but in respect to the wire from the DAC output to the other downstream...
-
dmance replied to the thread CHORD ELECTRONICS DAVE.Any downstream RF noise from the amplifier AC Mains connection or EM induced thru the speaker leads ...all this permeates to any...
-
dmance replied to the thread CHORD ELECTRONICS DAVE.Before you assume there is some kind of magic going on ...Consider that the preamp is in the DACs output path. Ask yourself... if Dave...
-
dmance reacted to GoldenSound's post in the thread Are there any alternatives to HQPlayer? with Like.There are plenty of other upsampling tools, including as mentioned above the Hydra Hub for example, but in terms of stuff that will...
-
dmance replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.That 'somehow' that's degrading a sound is that your source is a generator of RF noise ...that is the digital logic sets off MHz/Ghz...
-
dmance replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.Any metal appendage is an antenna. Signal or power. Shielding helps but rfi is insidious & incredulous ...but it travels meters in open...
-
dmance replied to the thread Chord Electronics - Hugo 2 - The Official Thread.I was exhibiting at CanJam NYC with my wares RF optimizing both a Hugo2 and TT2 through a similar HQPlayer setup. I had Utopia and...
-
dmance replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.I was at CanJam NYC (first show plying my wares) and sat through both of Rob Watt's talks and he came to my stand for a chat. In his...
-
dmance replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.You don't need reclocking. Mscaler reclocks and then all chord DACs reclock again. Modern DACs are immune to variations in upstream...
-
dmance replied to the thread Hugo TT 2 by Chord Electronics - The Official Thread.Drawing attached. Either of these will work. Presumably the interconnect has some level of shielding via the DAC's ground. However my...
-
dmance replied to the thread Hugo TT 2 by Chord Electronics - The Official Thread.This is great ...time for me to try XLR!. So what is the wiring diagram,then?
-
dmance replied to the thread Hugo TT 2 by Chord Electronics - The Official Thread.I've never touched the balanced XLR outputs. I know the single ended RCA's are just a direct lead from Rob's pulse array output (well...
-
dmance replied to the thread Hugo TT 2 by Chord Electronics - The Official Thread.FYI, I have DIY voxativs and recently adjusted my TT2 to low gain mode (from high gain). Big difference in SQ. I play music as loudly...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…