That did the trick, thanks a lot!!

Does anyone have the 1A/1Z working as a DAC with an iPhone? Using the Apple camera adapter and a Sony USB cable the 1Z recognizes the connection and the iPhone disables the volume control, so everything seems to be working, but I get no sound when I play music on the iPhone. It's the same issue...

Has anyone been able to get the 1Z working as a USB DAC with an iPhone? Using the iPhone camera adapter and the standard 1Z USB cable I can get the DAC screen on the 1Z with the volume to show up but no sound no matter what I play on the iPhone. I set the 1Z to not charge over USB, but can't...

If I recall correctly the 1A/1Z come stock with a Pentacon 4.4 jack.

They are heavier than most plastic shelled IEMs, as you would expect. In my short time auditioning them they kept coming unsealed because the weight slowly pulled them out of my ears. I'm pretty sure this could be resolved with different tips and having the cable tightened under your chin. I...

I tried the IEM-Z1R at the show driven by my 1Z. First impressions indicate some bass emphasis with an extended high frequency response. Very enjoyable to listen to but maybe a bit heavy on the bass on the 1Z.

Getting a bit off topic, but the TA-ER1 did not use an ALPS. Based on the markings it's from Matsushita, but possibly sub-contracted to Tokyo KO-ON Denpa.

A much simpler solution: 1. Open the jpg in MS Paint 2. File -> Save 3. Done! MS Paint doesn't support progressive jpg, so will automatically convert to baseline when you save.

It's not a good idea to convert the balanced output to RCA, since some amps will share a ground between both channels on the RCA inputs, which would be bad for the 1Z. Either use the single ended output or find an amp with balanced inputs. I haven't been in the market for an amp lately, but I'm...

The DAC in the 1Z is likely better than the ones in any of these receivers. If you're only going to use it for 2 channel listening you might be better off looking at fully analog amp and connecting the headphone output from the 1Z.

Evolution :)

Those stems look pretty standard for Fitear. They've always been a bit shorter than other brands because Fitear is designed to seal with the body of the ciem rather than just the stem. I wouldn't worry about fit on any Fitear model. I've never heard of anyone requiring a refit from them, they...

Jitter, electrical noise on the output signal, etc, etc. Some people will hear huge differences between transports, others will hear none. In my experience they make a larger contribution than cables but less than a dac change.

1. Power cables for amps would be designed to support high current loads. This in itself should not be a problem for use with a source component. There are plenty of cords that are designed to work equally well with both types of components though so I would probably steer clear of ones that...

I have a Sony TA-ER1 preamp that handles volume control.