Search results for query: *
- Users: xrk971
- Order by date
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
A wall powered Hakuin? That’s actually available as a daughterboard module on the Yarra preamp/headphone amp main board. https://www.diyaudio.com/forums/group-buys/334457-yarra-preamplifier-hpa-melbourne-db-buy-124.html It just needs a 24v single rail supply. Provide inputs and outputs and...- xrk971
- Post #424
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Maybe I should have asked over here if folks were interested. Although this thread has been here for a while and nothing until today. I don’t have any pocket Hakuin prototypes fully working yet. The amp part works but the charge indicator LED fuel gauge still needs work.- xrk971
- Post #420
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Hi Gill, Yes it has been ages and 30 amps later. The Hakuin is a really nice amp. I still haven’t had time to finished the pocket Hakuin with LiPo and DCDC and charging system through. Just not enough interest from folks. I have a module version of it for the Yarra as a preamp and that works...- xrk971
- Post #417
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
I am using an SMSL Sanskrit 10 which has a nice AK4490 DAC - one of the better ones out their IMO. Perhaps similar in signature to the Radstone's AK4375A. Sources included mix of FLAC and WAV files from either Jriver or Amazon HD streaming. You definitely can hear the difference with the Hakuin.- xrk971
- Post #415
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Here is a re-post if member Itsallinmyhead’s listening impressions in case you can’t access DIYA. Link to DIYA review- xrk971
- Post #413
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Testing of the Hakuin is going well. I have had a lot of help from member Itsallinmyhead on DIYA. He built several prototypes and found an issue with the battery fuel gauge meter. Fortunately, the rest of the PSU works well: the smart charger, the DC-DC step up, the ultra low noise LDO...- xrk971
- Post #412
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
New thread on DIYA to discuss technical aspects of the new HPA with battery management system. Amp will be called the Hakuin HPA. Block diagram of LiPo and wall-plug power management system: https://www.diyaudio.com/forums/headphone-systems/345851-hakuin-se-class-hp-amp.html- xrk971
- Post #410
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
3D printed case version with 5000 mAhr battery.- xrk971
- Post #409
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
I am looking at option to provide the 3D printed case for a nominal cost circa $30 - depending on how many people interested. There are many onlOne 3D printing services that will print for you if you provide a file. We may be able to leverage more units to bring costs down.- xrk971
- Post #408
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Dbaldock, Cool! Please respond in the DIYA thread to show interest.- xrk971
- Post #407
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Hi Folks, I haven’t been here for a while but thought you all might be interested in a new project brewing over on DIYA. It’s going to be a new PCA Mk II. This time fully assembled and tested and ready to run (RTR) all SMT design. You just need to install in your own mint tin or 3D printed...- xrk971
- Post #404
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Here’s the new Muscle Amp - uses eight OPA1622 in parallel. Can drive speakers even down to 4ohms. About 10w into 8ohms. Tested T 47ohms and listening with 50ohm HE400i. Fantastic dynamics. Zero noise or background. Powered with 25va 15v trafo through a cap multiplier for low noise power source...- xrk971
- Post #403
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
New Balanced Drive 2 Transistor SE Class A Headphone Amp with beautiful harmonic profile and ability to drive 50ohm cans. https://www.diyaudio.com/forums/headphone-systems/338656-balanced-drive-2-transistor-se-class-headphone-amp.html Measured FFT for 2Vpp itno 49ohms:- xrk971
- Post #402
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Here’s a new spin on this amp. Using an ultra low 117uA bias current in the JFET (via new DC setpoint resistors), the sound is sweeter (lower third harmonic relative to second) and lower overall THD, and more dynamic through higher gain. It seems that the input signal had to control a much lower...- xrk971
- Post #400
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
I was wondering when you were going to build the balanced DCA’s. Do you have 6 boards?- xrk971
- Post #399
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Simply a matter of parts running out of stock - I can order more of there is interest. I will put it back as soon as parts arrive in a week. Or he can preorder.- xrk971
- Post #397
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
No, it will have optional single ended input (which only gives single ended output.). Will follow diagram posted above.- xrk971
- Post #395
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
That’s a pretty lame way to bump a thread (worse than people who actually say “bump”). At least add some new info. I am thinking of offering my Pocket Amp, reconfigured as a balanced input / output amp as a transportable desktop amp. Contact me if you are interested - it will be on a custom...- xrk971
- Post #393
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Dbaldock9, I think I have a much simpler passive solution for you. It's detailed over on DIYA thread for DCA, but I will repeat here: You might be able to do this via passive "switching" on the input/output TRS or XLR jacks. Here is one approach to try... when using balanced, require a 4 pin...- xrk971
- Post #388
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Mypants, Sorry, don't understand your last post is referring to?- xrk971
- Post #386
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Yes, I have matched FETs for DCA. However my basement just got flooded so finding things may take me a few days.- xrk971
- Post #383
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Hi David, You might want to start participating in the GB thread - that’s where the community asks questions and share answers. That way, everyone benefits from the same questions you ask. There’s a lot of good info in the thread - like matching JFETs or what DC-DC converter to use, or what...- xrk971
- Post #381
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
I think you are overthinking this. You might want to just get a board and start building. Nothing is locked in concrete and you can swap parts to your hearts content as the copper is 2oz thick and held down with lots of vias on 2mm board. It’s very durable and can withstand desoldering. Build...- xrk971
- Post #380
- Forum: Portable Headphone Amps
-
New Portable Amp - "Pocket Class A" by xrk971 - now available as complete PCB
Those designations refer to all the optional pad sizes for different caps. This board was made for the DIY cap roller who likes to try different caps. They come in different lead spacings. The main thing to know is that the input cap should be at least 4.7uF film or electrolytic. If...- xrk971
- Post #379
- Forum: Portable Headphone Amps
-
The Audio Lounge
When I need balanced out I use my Focusrite 2i4 which has single and balanced outputs. It also has a nice DAC that goes up to maximum speeds. I use it connected to my PC laptop. Lately I have been using single ended output amps and find that they work just fine and lots of power. My latest amp...- xrk971
- Post #9,048
- Forum: Members' Lounge (General Discussion)