I've damped my case so far and reduced almost every fan noise...except the PSU. GPU, CPU and everything else is silent, but the PSU still gives off the usual fan noise. Are there any options left besides exchanging the PSU?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Silencing PSU Fan - Am I out of options?
- Thread starter reiserFS
- Start date
The way I see it you have 4 options:
1)You can change the fan inside the PSU to an aftermarket fan, did that before with good results.
2)You can remove the fan, did that too....its been maybe 6 months with no fan inside my Antec 380w Earthwatts power supply. The ps case is just slightly warm to the touch.
3)You can purchase a fan-less power supply, kinda expensive
4)You can put a manual fan speed control on the PS fan and adjust the speed manually to your liking.
1)You can change the fan inside the PSU to an aftermarket fan, did that before with good results.
2)You can remove the fan, did that too....its been maybe 6 months with no fan inside my Antec 380w Earthwatts power supply. The ps case is just slightly warm to the touch.
3)You can purchase a fan-less power supply, kinda expensive
4)You can put a manual fan speed control on the PS fan and adjust the speed manually to your liking.
xdanny
100+ Head-Fier
- Joined
- Aug 30, 2008
- Posts
- 112
- Likes
- 10
Dynobot,
Thanks for the suggestion, it's a great idea! I'm going to remove the fan in my PS. Have a question, what's the worst that can happen if that PS fails due to overheating? Can say, the rest the components inside the PC get messed up or would I just need to replace the power supply?
Thanks.
Quote:
....
2)You can remove the fan, did that too....its been maybe 6 months with no fan inside my Antec 380w Earthwatts power supply. The ps case is just slightly warm to the touch.
.....
The worst that can happen....Hmmmm maybe the PS blows up in a ball of flames and burns the house down. Which in turn spreads to a neighbors house and another until the whole neighborhood is burning which ignites the trees and dry grasses causing a forest fire burning thousands of acres of land. While trying to put out the fires several firemen are lost, planes crash due to the heavy smoke and people go into a panic thinking its a terrorist event which leads to a stock market crash and the further collapse of world economies.
But realistically if it fails it will just simply stop working....I think, maybe, possibly.
Quote:
Dynobot,
Thanks for the suggestion, it's a great idea! I'm going to remove the fan in my PS. Have a question, what's the worst that can happen if that PS fails due to overheating? Can say, the rest the components inside the PC get messed up or would I just need to replace the power supply?
Thanks.
xdanny
100+ Head-Fier
- Joined
- Aug 30, 2008
- Posts
- 112
- Likes
- 10
LOL,
That was funny!!
Yeah, I was thinking more like in terms of the motherboard, hard drives with my music collection - I don't give a rat's arse about the neighbors. (Just kidding, of course)
Thanks, Dynobot!!
That was funny!!
Yeah, I was thinking more like in terms of the motherboard, hard drives with my music collection - I don't give a rat's arse about the neighbors. (Just kidding, of course)
Thanks, Dynobot!!
Ohhhhh the mobo etc....
They will be fine. I would suggest not actually cutting the wire but to disconnect it and feel for temp differences. Mine is only 380w with a small fan, it barely gets hot and is not under heavy load.
If you are a little concerned you can always add a cheap heat sink.
They will be fine. I would suggest not actually cutting the wire but to disconnect it and feel for temp differences. Mine is only 380w with a small fan, it barely gets hot and is not under heavy load.
If you are a little concerned you can always add a cheap heat sink.
One more option
You could always buy a PiCO powersupply, very small and no fan 200watt seen below
You could always buy a PiCO powersupply, very small and no fan 200watt seen below
Quote:
Thanks for the answer, though I wouldn't really want to try the fanless option on a 750w supply. Do you have any kinds of recommendations for aftermarket fans that fit inside a PSU?
The way I see it you have 4 options:
1)You can change the fan inside the PSU to an aftermarket fan, did that before with good results.
2)You can remove the fan, did that too....its been maybe 6 months with no fan inside my Antec 380w Earthwatts power supply. The ps case is just slightly warm to the touch.
3)You can purchase a fan-less power supply, kinda expensive
4)You can put a manual fan speed control on the PS fan and adjust the speed manually to your liking.
Thanks for the answer, though I wouldn't really want to try the fanless option on a 750w supply. Do you have any kinds of recommendations for aftermarket fans that fit inside a PSU?
Quote:
Thanks for the answer, though I wouldn't really want to try the fanless option on a 750w supply. Do you have any kinds of recommendations for aftermarket fans that fit inside a PSU?
Silenx makes some of the quietest fans I have seen, one of their fans plus a manual speed adjustment thingy should work. You can put the fan in the PS and power it off the MB or PS connectors to make it easy.
http://www.silenx.com/index.asp
mrarroyo
Headphoneus Supremus
- Joined
- Jul 27, 2005
- Posts
- 19,073
- Likes
- 43
How about using some dampening material on the non moving part of the fan unit. This would reduce vibrations and perhaps lower the overall noise. I would use small pieces of dynamat strategically located.
rreis
New Head-Fier
- Joined
- Aug 23, 2010
- Posts
- 22
- Likes
- 0
Check this thread
http://www.silentpcreview.com/forums/viewtopic.php?t=48318&start=0&postdays=0&postorder=asc&highlight=&sid=ca3e2f76570219f87cf7017d2f2ba775
http://www.silentpcreview.com/forums/viewtopic.php?t=48318&start=0&postdays=0&postorder=asc&highlight=&sid=ca3e2f76570219f87cf7017d2f2ba775
Hookem
100+ Head-Fier
- Joined
- Apr 8, 2008
- Posts
- 271
- Likes
- 0
What power supply do you have ??? Antec, Corsair, Fortron, OCZ, PC Power and Cooliing, Thermaltake ??? Knowing what piece of hardware you are talking about would get more detailed help.
Hard to recommend a solution without knowing what animal we are talking about.
Hard to recommend a solution without knowing what animal we are talking about.
momomo6789
1000+ Head-Fier
- Joined
- Sep 4, 2009
- Posts
- 1,405
- Likes
- 13
you need to build a small box with a lip like so
box > |
| <---- is top of box
| | <--- Lip to let air out over heating ps is bad
\/ | |\/ <--- Air going out of box
^^^^ air flow from fan
fan here if you can figure the gerneral idea out from my picture i dont blame you but i wont help you any further either.
line box with dampening cardboard works fine for the box or spend a little and buy a 90% efficiency psu that turns off its fan when its not under load
STUPID FORUM IS USELESS ..... so easy to get errors .....
box > |
| <---- is top of box
| | <--- Lip to let air out over heating ps is bad
\/ | |\/ <--- Air going out of box
^^^^ air flow from fan
fan here if you can figure the gerneral idea out from my picture i dont blame you but i wont help you any further either.
line box with dampening cardboard works fine for the box or spend a little and buy a 90% efficiency psu that turns off its fan when its not under load
STUPID FORUM IS USELESS ..... so easy to get errors .....
momomo6789
1000+ Head-Fier
- Joined
- Sep 4, 2009
- Posts
- 1,405
- Likes
- 13
momomo6789
1000+ Head-Fier
- Joined
- Sep 4, 2009
- Posts
- 1,405
- Likes
- 13
PAGE OF LINES ............
Users who are viewing this thread
Total: 2 (members: 0, guests: 2)