peterinvan
1000+ Head-Fier
Why can I not leave the LPS switched on at all times?I can recommend the Fiio PL50 too. I am using it for the K7. The only negative thing: power switch on the rear of the power supply.
Why can I not leave the LPS switched on at all times?I can recommend the Fiio PL50 too. I am using it for the K7. The only negative thing: power switch on the rear of the power supply.
Are you maxing foobar and windows system volume controls? Are you running K7 at high gain? JT1 has a 88 dB/mW sensitivity at 32 Ohms. K7 is able to deliver 2W at 32 Ohms thru its balanced output, so you should get 121 dB peak (that means between 100 and 113 dB average sound level), which are close to deafening levels.I just got a balanced cable for my Fiio JT1 but does not feel that much more powerful. More like 30% more instead of almost double. And also with my ATH WS1100 i almost have the volume at max and also in Foobar. So the power is a little less then i thought and almost the same power as my old Fiio E10 haha.
No only high gain is off cause i get more hiss then but all else is at the max. And with most music it is fine the volume but still thought it would be more.Are you maxing foobar and windows system volume controls? Are you running K7 at high gain? JT1 has a 88 dB/mW sensitivity at 32 Ohms. K7 is able to deliver 2W at 32 Ohms thru its balanced output, so you should get 121 dB peak (that means between 100 and 113 dB average sound level), which are close to deafening levels.
I see. At 32 Ohms, K7 doubles power from unbalanced (1W) to balanced output (2W), which accounts for 3 dB more volume.No only high gain is off cause i get more hiss then but all else is at the max. And with most music it is fine the volume but still thought it would be more.
I notice indeed a bit more power and 3 db is not that much so i get it. But for most music the volume is good enough and even too much with some.I see. At 32 Ohms, K7 doubles power from unbalanced (1W) to balanced output (2W), which accounts for 3 dB more volume.
Which phone? I’ve tried with my iPhone 15 and iPad, Amp works as expected.Tried connecting the K7 to my phone using an usb to usb-c plug, though when playing music the sound came out from the phone like the amp wasn't even connected. The amp was switch to usb input. Any recommendations?
mine also does that sometimes. for me it helps to turn off k7 and back on while the phone is plugged in or unplug the phone and plug it in again, not sure which of these actions helps but in the end it always works....sometimes it also takes a few moments until K7 recognizes that the phone was plugged inTried connecting the K7 to my phone using an usb to usb-c plug, though when playing music the sound came out from the phone like the amp wasn't even connected. The amp was switch to usb input. Any recommendations?
Little experience with Android phones, but I read that you need to configure the OS to send audio thru USB. Hopefully some Andorid users will shed light on this issue.Oppo X5 lite. I didn't try at the time but I'm wondering if in phone settings you need to tell it to output to usb instead of phone speaker. But as mentioned, should pick up automatically. Will try again tomorrow. It's an office amp
Dear friend,Tried connecting the K7 to my phone using an usb to usb-c plug, though when playing music the sound came out from the phone like the amp wasn't even connected. The amp was switch to usb input. Any recommendations?
Stay updated on FiiO at their sponsor profile on Head-Fi.
|