-
-
Chefguru replied to the thread The Stax Thread III.@Dukei is in Europe and building carbons as the price point stated earlier. He did a fantastic job with my amp. @soren_brix is also in...
-
Chefguru reacted to hasnath's post in the thread PSVANE Horizon Vacuum Tube Giveaway and Audition Event with Like.8x EL34 2x 12AU7 2x 12AX7
-
Chefguru replied to the thread The Stax Thread III.Forgot about this one. Assuming you have the fund this is also a good move for small space. BHSE tier
-
Chefguru replied to the thread The Stax Thread III.There are no other options due to the psu size constraints. CFA-e it is then, congratulations on being the first and be sure to tell us...
-
Chefguru replied to the thread The Stax Thread III.For the 007 you’ll need the KgssHV at minimum. IMO not even the modified 717/727 will do (although they sound fine with most other...
-
Chefguru replied to the thread The Stax Thread III.Strange. The original CFA-E was designed as a lower cost alternative to building a kgssHV for the DIY community. Reviews on the original...
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.I'm trying to understand the effects of the 300b in replace of the el34. It seems they pull less, so I'm wondering if the differences...
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.@kevin gilmore is this because the 300b pull less than el34? standard mt 135w from high voltage plus about 80-85 watts from tube...
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.@Dukei built my standard megatron and is also building another megatron for me with some “upgrades”. He’s Europe based and great to work...
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.@smk5r do you have a device to measure the watt pull from the wall? Curious especially with the rectifier tubes. Standard MT is about...
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.Agreed. Do you have a 007 btw ?
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.This is not the case with my experience with the classic MT (especially not with ecc80s) nor the DIY Kg T2.
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.Okay good to know. I suppose the difference with the MT is that the input tubes can technically be swapped for different tube types (e.g...
-
Chefguru replied to the thread KG Megatron vs KG Stax T2.Have you felt the T2 changed significantly with rolling? I was under the impression that the curves of the tubes will really determine...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…