General Information
The design of the B-410 started when the B-400+ was launched. During the lengthy development phase, a completely new atapi controller was made for control of the CD Drive. Using Densens own software, the controller not only controls the drive, it also controls the complete user interface with remote, and display. The display now matches Densens B-110, B-150, B-250 amplifiers.
The CD Drive is modified at the Densen factory with a clockcontroller that allows the motherboard to control the system clock, to avoid jitter by using same clock in both sending and receiving end of the datastream.
The powersupply of the B-410 uses a large custommade toroid transformer, which has 4 individual outputs, so the B-410 uses 4 individual powersupplies. The B-410 contains 4 custommade capacitors each of 10.000uF giving a total storage capacity of 40.000uF which would not be out of place in a poweramplifier, but which in a CD player is exceptional.
The DAC and analogue board is separated from the main CPU board, and can be upgraded as technology is progressing. Allready from the beginning the B-410 can be upgraded to the forthcoming B-420 and B-440 players when these are introduced.
The DAC is a 24 bit type which is mounted under a shielded box, to avoid digital interference on the analogue stages. Naturally the B-410 can have the absolute phase of the signal inverted, so even recordings with wrong phase can be played correct so even recordings with wrong phase can be played correct.
The analogue stage uses Densen’s unique non feedback class A topology. It is further perfected from the earlier designs, and are one of the key elements that secures the extreme high sound quality of the B-410.
Soundwise the B-410 is the result of Densen headhoncho Thomas Sillesens desire to make a CD Player that not only surpasses the excisting Densen models, but a CD player that will be a benchmark for what can be expected from CD players not only at the pricepoint of the B-410, but also at pricepoints much higher. The B-410 is transparent, dynamic, precise, engaging, musically correct, with a precise soundstage, and the ability to create a sound so good you forget you are “just” listening to a CD Player.
The B-410 has double outputs, BNC digital output and Densen’s own Digital output format which allows for easy upgrade to separate DAC and Transport, if Densen decides to launch a separate DAC. The digital outputs can be switched off. It also has DenLink for easy communication between Densen products and for use in multiroom systems.
SPECIFICATIONS
Customized CD transport
Line outputs: 2
Digital outputs: 2
Storage capacity: 40.000uF
D/A converters: 2
D/A converters type: 24bit Just listen...
Weight/shippingweight: 8/10 Kg
Product dimensions (WxDxH): 440x310x64mm
The CD Drive is modified at the Densen factory with a clockcontroller that allows the motherboard to control the system clock, to avoid jitter by using same clock in both sending and receiving end of the datastream.
The powersupply of the B-410 uses a large custommade toroid transformer, which has 4 individual outputs, so the B-410 uses 4 individual powersupplies. The B-410 contains 4 custommade capacitors each of 10.000uF giving a total storage capacity of 40.000uF which would not be out of place in a poweramplifier, but which in a CD player is exceptional.
The DAC and analogue board is separated from the main CPU board, and can be upgraded as technology is progressing. Allready from the beginning the B-410 can be upgraded to the forthcoming B-420 and B-440 players when these are introduced.
The DAC is a 24 bit type which is mounted under a shielded box, to avoid digital interference on the analogue stages. Naturally the B-410 can have the absolute phase of the signal inverted, so even recordings with wrong phase can be played correct so even recordings with wrong phase can be played correct.
The analogue stage uses Densen’s unique non feedback class A topology. It is further perfected from the earlier designs, and are one of the key elements that secures the extreme high sound quality of the B-410.
Soundwise the B-410 is the result of Densen headhoncho Thomas Sillesens desire to make a CD Player that not only surpasses the excisting Densen models, but a CD player that will be a benchmark for what can be expected from CD players not only at the pricepoint of the B-410, but also at pricepoints much higher. The B-410 is transparent, dynamic, precise, engaging, musically correct, with a precise soundstage, and the ability to create a sound so good you forget you are “just” listening to a CD Player.
The B-410 has double outputs, BNC digital output and Densen’s own Digital output format which allows for easy upgrade to separate DAC and Transport, if Densen decides to launch a separate DAC. The digital outputs can be switched off. It also has DenLink for easy communication between Densen products and for use in multiroom systems.
SPECIFICATIONS
Customized CD transport
Line outputs: 2
Digital outputs: 2
Storage capacity: 40.000uF
D/A converters: 2
D/A converters type: 24bit Just listen...
Weight/shippingweight: 8/10 Kg
Product dimensions (WxDxH): 440x310x64mm
