DIY and Mods
Do-it-yourself and modification guides.
Quote:
you can get the switchcraft much shorter than that with a dremel. the neutrik and oyaide can be made much shorter again. dremel again. with the neutrik, leave the connector all assembled and put it in a vice, dremel through the whole barrel with a cutoff wheel about 3mm from the...
I think this is a little off topic for some but here is a picture a a LOD I just finished making, this is made of Piccolino wire which is made of a silver/ gold Alloy and is said to be the best sounding portable wire you can get and I and many totally agree having actually used it and listened...
For those looking for inspiration or just interested in Headphone related DIY projects you'll find interesting ideas here.
http://www.head-fi.org/forums/f6/diy-headphone-stand-thread-249671/
Adding Rod Locks to Grado Headphones
You will need:
2 one-half inch (black or silver) hex cap screws with 10/24 thread (Lowes, Home Depot)
10/24 thread tap
5/32” drill bit
Removing the Rod blocks (the black plastic thingies marked “L” & “R”)
Mark the...
Hey guys,
So I just got my new pair of HD-555 and wanted to do everything right this time around. So I will do my best to explain how to "widen" the soundstage for the Sennheiser HD-555/595 models. Originally I used a soldering iron because that was the only thing in the how-to's other...
So, here is the best instructions I can give at this point. It is a fairly simple process. I would have taken better pictures doing the process, but I had only 2 sets of hands and they were either holding a piece to be soldered or holding the soldering iron. I would have taken video, but I...
The Definitive Answer to the common Question: "What is the Pin-out for a Line Out Dock for my Ipod Generation X?" The answer is very suscinctly described - with pictures here. This apparently works with G3 Iphones and is compatible with prior versions of the Ipod Classic and Nano. Credit...
[ This is the original work by our beloved rickcr42, whom we'll always remember for his dedication to the Head-fi community and the DIY forum ]
------------------------------------------------------------------------------------------------------------------------------
* Please refrain...
[ This is the original work by our beloved rickcr42, whom we'll always remember for his dedication to the Head-fi community and the DIY forum ]
DIY PARTS
__________________________________________________ _______________
PARTS SUPPLIERS
U.S.A.
Antique Electronic Supply...