adydula
Headphoneus Supremus
- Joined
- Dec 14, 2010
- Posts
- 5,068
- Likes
- 13,048
Anything with an impedance of 250 ohms or higher.....
The stock tubes will work just fine..
Alex
The stock tubes will work just fine..
Alex
I am aware of the impedance, but I was looking for more specific recommendations on interesting tube and headphone choices.Anything with an impedance of 250 ohms or higher.....
The stock tubes will work just fine..
Alex
Yes, but you should also remember that tubes used do make a difference in how it sounds so I'd budget for some alternative tubes to try.Im considering the Crack (and potentially Speedball) for my HD650. I mainly listen to some old school hiphops. Is the crack good for bass reproduction and extension?
I really like the Tung-Sol 7236 as my power tube for quality bass extension [Hip-Hop, EDM. etc.] Other tube is a Sylvania 7N7 w. adapter. Love this combo with my 6XX!!! The Winged-C was good as well, but couldn't match the punchy low end of the 7236.Im considering the Crack (and potentially Speedball) for my HD650. I mainly listen to some old school hiphops. Is the crack good for bass reproduction and extension?
7236 is a power tube. There are special 7n7 tube available (Frankies).I really like using a Tung-Sol 7236 as the driver to get excellent bass. Other tube is a Sylvania 7N7 w. adapter. Love this combo with my 6XX!!! The Winged-C was good as well, but couldn't match the quality low end of the 7236.
Yes, I use 7236 as power tube and use a 7N7 to 12AU7 adapter for the other tube!7236 is a power tube. There are special 7n7 tube available (Frankies).
I thought the 58X would not be a good match seeing as it's only 150 ohms? My understanding is it's preferred to use phones with 250+. I was considering getting a 58X but would like to ideally get something that plays nice with the Crack. Thoughts? I'd like to check out some more pairings with this amp, but my current line-up doesn't look to have any high impedance options. Suggestions? Was looking at DT 1990's but that might be out of my range atm. Maybe 770s? Any folks use these with the Crack?I've spent a bit more time with the BH crack+SB and found that it is a really good match with the HD6XX and HD58X. Using the A&K SPKM as a source, I'm starting to understand why are there so many recommendations of the BH Crack + HD6XX combination on the forums. The highs are effortless while non fatiguing, the mids are smooth and holographic and the lows are satisfyingly full as well. With the 58X, highs come off a little more exciting and the lows hit slightly harder, however it does lose some of those romantic mids the 6XX are capable of.
I'm now starting to think of what other tube combinations to roll to improve sound, but as it stands, the stock BH crack+SB+HD6XX/58X is pretty much hard to beat.
Besides the 6XX and 58X, I have also tried the ZMF Auteurs with the BH crack+SB. I do get plenty of volume out of the BH crack with the Auteurs but somehow i feel that the mids are too forward and the lows are not satisfying enough. Its like some of the ZMF Auteur magic is gone with this combination. To me, the Auteur sounds best out of the Glenn's EL3N amp!
I thought the 58X would not be a good match seeing as it's only 150 ohms? My understanding is it's preferred to use phones with 250+. I was considering getting a 58X but would like to ideally get something that plays nice with the Crack. Thoughts? I'd like to check out some more pairings with this amp, but my current line-up doesn't look to have any high impedance options. Suggestions? Was looking at DT 1990's but that might be out of my range atm. Maybe 770s? Any folks use these with the Crack?