[XERO1]

SPECS
Maximum Power, 16Ω: 1.2W RMS per channel
Maximum Power, 32Ω: 1.0W RMS per channel
Maximum Power, 50Ω: 800mW RMS per channel
Maximum Power, 300Ω: 400mW RMS per channel
Maximum Power, 600Ω: 200mW RMS per channel
Output Impedance: Less than 0.6Ω at Low or High gain
Input Impedance: 50KΩ
Gain: Low 1.8x (5.1dB) -- High 6.3x (17.8dB)
Topology: Fully discrete, massively paralleled transistors, unique take on Continuity circuit
Power Supply: 14-16VAC/1A “wall-wart” transformer
Power Consumption: 6W
Size: 5"W x 3.5"D x 1.25”H
__________________________________________________

https://nitschsound.com/products/magni-piety
__________________________________________________

- NITSCH is Head-Fi community member CEE TEE's (@CEE TEE) newly launched company
- The Magni Piety will be NITSCH's first product to be released
- This awesome little amp was debuted at the 2022 Schiit x Emotiva Texas Audio Round-up (7-22-2022)
- The Magni Piety is quite unique, being the only Magni amp to use a version of the Continuity output stage
- The Magni Piety will be a limited edition item (1000 units) and there will only be one production run
- The MSRP is $149.99
__________________________________________________

-- 11-20-22 Update (1) --

The NITSCH x Schiit Magni Piety has officially been launched and is available now!!


-- 11-20-22 Update (2) --

Well, that's all folks!!
The Magni Piety's entire limited run of 1000 units has SOLD OUT in under 12 hours!!!
Thanks and congratulations to Christain and Jason for making this cool little amp a reality.
And to everyone who was fortunate enough to snap one up.... ENJOY IT!!

 

[M3NTAL]

I'm excited to compare the Piety vs. the IEMagni and Vali 2+ (with IEM's mostly). Hey CEE TEE - I hope you think about making the t-shirt available also.

 

[XERO1]

Reserved

 

[M3NTAL]

Yes to that specific one and / or just some solo Nitsch goods. I think I own or have owned most of the audiophile products you've been apart of and I see myself continuing to support you. You've been awesome to so many people in this hobby and I wish you the best. People should be excited for amp No. 02 also.

 

[Beefy]

Update - I'm not sure if the 'Get Notified' button on NITSCH's website is working properly (at least for Windows). I have notified CEE TEE about this.

It's just a mailto link, to send an email to piety@nitschsound.com. Works fine on desktop if you have an email client installed, or you could probably just email manually.

 

[XERO1]

It's just a mailto link, to send an email to piety@nitschsound.com. Works fine on desktop if you have an email client installed, or you could probably just email manually.

Yeah. I got an email from CEE TEE saying that when you click on the link, even if no info is left, he gets a record of the email of the person who clicked on it.

He also said he's working on something that will work a little better.

I'll update the OP to reflect this.

 

[M3NTAL]

That's excellent news. I wasn't sure what to type in the e-mail and didn't receive any confirmation, but I have trust that it is there in his inbox somewhere

 

[Insidious Meme]

Reading trusted ears reviews, I'm looking forward to this release. Definitely will compare with the amp mix I already have.

 

[Sheep3000]

Reserved

How did you get one reserved??

 

[SDBiotek]

How did you get one reserved??

The post is reserved, not the device. It will be updated later on with useful info, so it's not buried deep in the thread.

 

[Sheep3000]

The post is reserved, not the device. It will be updated later on with useful info, so it's not buried deep in the thread.

Oh, sorry-
I understand now lol

 

[npfries]

A mimby in that color scheme would complete this for me

I’ll be picking this up for sure if I can snag it before they are gone

 

[Philimon]

@CEE TEE just sent out an update.:

Some good news on Piety progress:

- The soldered board sample was tested and approved by Jason.
- The PCBs should be soldered and completed in one to three weeks.
- When all parts & packaging are on their way to me, I’ll have a better idea about final assembly.

Can’t wait to send the next update, thank you for following the Piety!

Cheers,

Christian (CEE TEE)

The pious white pcb is a nice touch.

 

[XERO1]

FYI, if you live in the LA area and would like to hear the Magni Piety, I will have one at the Head Space SoCal Head-Fi Meet tomorrow.

It's being held at Rosson Audio Design's office in Reseda from 12-6PM.

If you're planning on coming by, please RSVP by using the link in the OP of the thread for the meet.

https://www.head-fi.org/threads/pos...0-1-2022-head-fi-meet-by-rosson-audio.964964/

See you there!!

 

[jbarrentine]

Is this one going to kill headphones too?