[G0rt]

CV4033 in the wild...

 

[jonathan c]

Is it fairly easy to take off the cover? Are any special tools needed? I ask because I want to install (remove) Tubemonger adapters without damage / wear n’ tear.

 

[ksorota]

Is it fairly easy to take off the cover? Are any special tools needed? I ask because I want to install (remove) Tubemonger adapters without damage / wear n’ tear.

Its fairly straight forward, just a lot of screws. The hardest part is putting it all back together with the LED light lined up.

 

[Rowethren]

Is it fairly easy to take off the cover? Are any special tools needed? I ask because I want to install (remove) Tubemonger adapters without damage / wear n’ tear.

Do you need to take it apart to fit an adapter? I normally just attached them to the tube and slot them all in in one go.

Seperatly I contacted TubeMonger about the CV4033 and adapters. They referred me to the manufacturer:

https://pulsetubestore.com/products...-plug-play-ready-to-use-m-pairs-quads-singles

https://pulsetubestore.com/products...uction-base-9-pin-b9a-noval-not-made-in-china

 

[Guidostrunk]

Do you need to take it apart to fit an adapter? I normally just attached them to the tube and slot them all in in one go.

Seperatly I contacted TubeMonger about the CV4033 and adapters. They referred me to the manufacturer:

https://pulsetubestore.com/products...-plug-play-ready-to-use-m-pairs-quads-singles

https://pulsetubestore.com/products/12axx-to-ecc88-adapter-plug-play-novib-©-1960s-nos-british-mcmurdo-phenolic-socket-on-top-plus-vibration-reduction-base-9-pin-b9a-noval-not-made-in-china

Now that's interesting. It's literally the same font and listing as tubemonger. Makes me wonder if it's their store.
Regardless, people have access to both now lol

 

[Rowethren]

I think they are independent of each other but Pulse Tube Store supply custom made adapters and tubes for TubeMonger.

The person I spoke to at TubeMonger said the people at Pulse Tube Store are in India so wouldn't reply to any messages until tomorrow due to the time difference.

 

[ksorota]

You do not have to take it apart to put the adapters in, but removing the adapter is a bit difficult with the top on. Its very easy to get the adapter off when the top is off though!

 

[Rowethren]

You do not have to take it apart to put the adapters in, but removing the adapter is a bit difficult with the top on. Its very easy to get the adapter off when the top is off though!

Ah that makes sense. Thankfully I have never had a problem removing them before.

You lot are a terrible influence, just ordered a set of Brimar CV4033 for my Mjolnir 2. @Ripper2860 would be so proud

 

[Guidostrunk]

Ah that makes sense. Thankfully I have never had a problem removing them before.

You lot are a terrible influence, just ordered a set of Brimar CV4033 for my Mjolnir 2. @Ripper2860 would be so proud

Did you get the adapters?

 

[Rowethren]

Did you get the adapters?

Yep, I would have been pissed if the tubes arrived and I couldn't use them!

 

[Guidostrunk]

Yep, I would have been pissed if the tubes arrived and I couldn't use them!

Definitely post your thoughts after you spend some time with them. Don't judge them out of the box. They take a bit to open up to their full potential.

 

[jonathan c]

You do not have to take it apart to put the adapters in, but removing the adapter is a bit difficult with the top on. Its very easy to get the adapter off when the top is off though!

Thank you. It was the removal, should it occur, of the adapters that I was concerned about.

 

[jonathan c]

I just put in an order for extra 12Axx to ECC88 adapters with Pulse Tube Store via their website. No “out of stock” indication, payment via PayPal.

 

[Guidostrunk]

I just put in an order for extra 12Axx to ECC88 adapters with Pulse Tube Store via their website. No “out of stock” indication, payment via PayPal.

You happen to grab a pair of cv4033?

 

[Guidostrunk]

You happen to grab a pair of cv4033?

I also have an extra pair of 7728 i can send your way for evaluation when you get your MJ2 back if you'd like. Shoot me a pm