Anyone knows the use of these round pieces of felt ? Some square damping came with the Blackwood I bought recently, which i've put above the drivers to reduce a bit the 5-6 khz peak. But I dont know the use of the round piece.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
ZMF x Vibro & ZMF Blackwood Discussion Thread.
- Thread starter grizzlybeast
- Start date
- Joined
- Oct 19, 2008
- Posts
- 4,118
- Likes
- 25,339
Anyone knows the use of these round pieces of felt ? Some square damping came with the Blackwood I bought recently, which i've put above the drivers to reduce a bit the 5-6 khz peak. But I dont know the use of the round piece.
It would just go in front of the driver, under the earpads!
ZMF headphones hand-crafts wood headphones in Chicago, USA with special attention to exceptional sound and craftsmanship.
Stay updated on ZMFheadphones at their sponsor profile on Head-Fi.
|
Oh nice, thanks for the answer Mister ZMF.
Jbmorrey
500+ Head-Fier
- Joined
- Dec 21, 2014
- Posts
- 563
- Likes
- 30
I am looking for a pair of inexpensive temporary Vibro compatible earpads. If I like them, then I plan on investing in a nice lambskin set. Any options for a inexpensive pair for temporary use? Like possibly a Fostex earpad?
Thanks so much for any suggestions.
James
Thanks so much for any suggestions.
James
mysticstryk
Headphoneus Supremus
- Joined
- Dec 9, 2008
- Posts
- 2,417
- Likes
- 718
I am looking for a pair of inexpensive temporary Vibro compatible earpads. If I like them, then I plan on investing in a nice lambskin set. Any options for a inexpensive pair for temporary use? Like possibly a Fostex earpad?
Thanks so much for any suggestions.
James
Brainwavz might fit, I'd go with the angled pads if they do. The official Oval pads would still be your best bet though. The Vibro was tuned to work specifically with the Oval pads, aftermarket pads could have a negative impact on the sound.
Edit: Just remembered I have the broken pieces of a Vibro in my basement somewhere. I have brainwavz pads laying around as well. I will see if they fit and let you know.
Last edited:
Jbmorrey
500+ Head-Fier
- Joined
- Dec 21, 2014
- Posts
- 563
- Likes
- 30
Brainwavz might fit, I'd go with the angled pads if they do. The official Oval pads would still be your best bet though. The Vibro was tuned to work specifically with the Oval pads, aftermarket pads could have a negative impact on the sound.
Edit: Just remembered I have the broken pieces of a Vibro in my basement somewhere. I have brainwavz pads laying around as well. I will see if they fit and let you know.
Perfect, thanks for looking into that for me. I did find an old pair of Alacantra pads off of a pair of shure1540 fit, but they are quite worn out and not leather, so not sure what impact to the sound they may have.
James
mysticstryk
Headphoneus Supremus
- Joined
- Dec 9, 2008
- Posts
- 2,417
- Likes
- 718
Perfect, thanks for looking into that for me. I did find an old pair of Alacantra pads off of a pair of shure1540 fit, but they are quite worn out and not leather, so not sure what impact to the sound they may have.
James
Brainwavz do not fit. Tried regular and angled.
Jbmorrey
500+ Head-Fier
- Joined
- Dec 21, 2014
- Posts
- 563
- Likes
- 30
Brainwavz do not fit. Tried regular and angled.
Bummer... thank you for looking into it and confirming.
James
MilesR
100+ Head-Fier
- Joined
- Mar 22, 2015
- Posts
- 142
- Likes
- 42
I have a question that someone might be able to help me with. Has anyone tried the Blackwoods with Ibasso DX200 Amp 8 ? What are your thoughts. I was thinking of buying them but wondering if amp8 has enough juice.
- Joined
- Oct 19, 2008
- Posts
- 4,118
- Likes
- 25,339
I have a question that someone might be able to help me with. Has anyone tried the Blackwoods with Ibasso DX200 Amp 8 ? What are your thoughts. I was thinking of buying them but wondering if amp8 has enough juice.
Corresponded with @MilesR via email as well - but for anyone wondering - 300 mW at 50 ohms gets you plenty of volume, and 1W or over gets you lots of punch and weight. They like high gain and power ofcourse, but I've been impressed with the quality of portable players lately, my Chord Mojo even does nice things with the t50 drivers!
ZMF headphones hand-crafts wood headphones in Chicago, USA with special attention to exceptional sound and craftsmanship.
Stay updated on ZMFheadphones at their sponsor profile on Head-Fi.
|
i dunno, i have been using them with theI have a question that someone might be able to help me with. Has anyone tried the Blackwoods with Ibasso DX200 Amp 8 ? What are your thoughts. I was thinking of buying them but wondering if amp8 has enough juice.
ive been using mine lately with my ifi micro black label. plenty of power and weight. i really love these headphones. they dont have the effortless quality that the Atticus have, but such convincing soundstage and surprising detail. and the bass! its so friggin good...sub-bass for days.Corresponded with @MilesR via email as well - but for anyone wondering - 300 mW at 50 ohms gets you plenty of volume, and 1W or over gets you lots of punch and weight. They like high gain and power ofcourse, but I've been impressed with the quality of portable players lately, my Chord Mojo even does nice things with the t50 drivers!
these things really are remarkable.
I use mine almost everyday. They are amazing closed backs and really shine with acoustic music. I can listen to them all day, with zero fatigue. I really think they are perfect and for the money, can not be beat. The sounstage is massive, for a closed back.i dunno, i have been using them with the
ive been using mine lately with my ifi micro black label. plenty of power and weight. i really love these headphones. they dont have the effortless quality that the Atticus have, but such convincing soundstage and surprising detail. and the bass! its so friggin good...sub-bass for days.
these things really are remarkable.
pjyi
100+ Head-Fier
- Joined
- Feb 19, 2013
- Posts
- 208
- Likes
- 35
Has anyone listened to both blackwoods and e-mu teak's?
i have them both. they are very different.Has anyone listened to both blackwoods and e-mu teak's?
the Blackwood has a good left-right soundstage but not deep. it has really great cohesiveness throughout the sound...it feels like all of it sits in the same space. its more neutral than the E-Mu, also has tremendous sub-bass. its quite heavy and isnt great with glasses. also takes a LOT of power to run well.
the E-mu is abit more effortless, the soundstage is more intimate but also deeper. more v-shaped but not crazy. its a snappier headphone, probably easier to appreciate in general, fantastic bass and good treble and easier to drive. the soundstage surprises at times, is lest consistent than the Blackwoods. I should mention i have the Eikon pads on the E-mus with the attenuation ring also.
they are both great and i will never let either of them go
that said...the Blackwoods suck you in more/
pjyi
100+ Head-Fier
- Joined
- Feb 19, 2013
- Posts
- 208
- Likes
- 35
It seems like I would really like the sound of e-mu! Thank you very much I wonder why e-mu's aren't as popular as x00's.i have them both. they are very different.
the Blackwood has a good left-right soundstage but not deep. it has really great cohesiveness throughout the sound...it feels like all of it sits in the same space. its more neutral than the E-Mu, also has tremendous sub-bass. its quite heavy and isnt great with glasses. also takes a LOT of power to run well.
the E-mu is abit more effortless, the soundstage is more intimate but also deeper. more v-shaped but not crazy. its a snappier headphone, probably easier to appreciate in general, fantastic bass and good treble and easier to drive. the soundstage surprises at times, is lest consistent than the Blackwoods. I should mention i have the Eikon pads on the E-mus with the attenuation ring also.
they are both great and i will never let either of them go
that said...the Blackwoods suck you in more/
Users who are viewing this thread
Total: 3 (members: 0, guests: 3)